View More Choices
The BB96 is a rugged hot melt applicator system developed specifically to melt and pump high viscosity butyl rubber based sealants. The system is designed for applications involving the assembly of sealed insulating glass units. The melt unit features a 15 lb (6.8 kg) capacity tank. The cylindrical design accepts briquette form butyl sealants, which are converted to
fluid state and pumped by an electric motor-driven gear pump through a L2 handgun/hose assembly. A rotating chain and scraper
in the tank propels the molten butyl sealant
Tank temperature is regulated by an adjustable bimetallic controller mounted directly on the melt unit base. Hose temperature is controlled by an adjustable thermostat with capillary bulb sensor. The BB96 features the proven all-electric heating and pumping system.
The melt unit is housed in an industrial-grade sheet metal enclosure and comes with an 8ft handgun/hose assembly.
Sold by the: Each
Minimum order: 1
- BB96 Hot Melt unit
L2 handgun
8 ft. hose
33 Pounds of Hot Melt Butyl EdgeTherm 3500
and your choice of 3 brass nozzle tips (3/16'', 1/4'' 5/16'', 3/8'', 1/2'' and 3/4'')
Additional information
ELECTRICAL
Voltage - 115 VAC, 60 Hz with ground
240V Models Available on Special Order
Wattage - 1265 Watts
Motor Rating - 1/6 hp, gearbox
38 rpm output
Warm-Up Time - 45 to 60 minutes
FUNCTIONAL
* All-electric systems available for 115 or 230 V
* Pumps high viscosity materials up to 500,000 centipoise
* No compressed air required, eliminating complexities of air
operation
* Reliable, smooth-output, positive displacement V4 gear pump
* Pump warmup thermostat protects pump and motor
during system startup
* Tank gun/hose temperatures independently controlled
* Over-temperature protection if tank thermostat fails
* Pump output easily adjusts by turning external knob on
flow control valve
* Switched handgun assembly decreases pump/motor wear
and increases service life
The L2 Handgun is designed for applying high viscosity
rubber based materials. Combined with the BB96
melt unit, operators can easily apply melted material to
their substrates.
Important notes
Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Shipping note
$680.00 + $2.00 per item + $7.00 Packing charge (if applicable, see above) for orders subtotaling less than $45.00.
NOTE: Shipping charges apply to the 48 continental states ONLY.
Extra shipping charges may apply to shipments to Hawaii and Alaska.
We will call you with any additional shipping charges.
NOTE: The customer must pay for any customs charges associated with international shipments.
Book Stand with the Storage Stands High Quality
Shower Doors
Ultra Line
