Home :: C.R. Laurence Products :: Commercial Door Rails :: Square 4 Inch Door Rails :: CRL Polished Brass 1/2" Glass 4" Square Door Rail Without Lock - 35-3/4" Length CRL DR4SPB12S

CRL Polished Brass 1/2" Glass 4" Square Door Rail Without Lock - 35-3/4" Length CRL DR4SPB12S

CRL Polished Brass 1/2" Glass 4" Square Door Rail Without Lock - 35-3/4" Length CRL DR4SPB12S
SKU
DR4SPB12S
Our price:
$592.58
Qty

View More Choices

Our innovative glass entrance system, the CRL Wedge-Lock® Door Rail System features the exclusive CRL Wedge-Lock® Securing System (U.S. Patents 6,434,905 and 6,912,818 B2, Canadian Patent 2,419,706, and European Patent No. EP 1 404 939 B1). A totally new concept for securing the glass in the door rail. It works by applying pressure from the bottom of the door rail, using two glass retaining aluminum extrusions via a flat stainless steel bar. As this bar is pulled down with socket head cap bolts, pressure is applied to the glass retaining aluminum extrusions. The bottom of the extrusions are at an angle and fit into an angled groove in the door rail. As the glass retaining extrusions are being pulled down, the angled wedge in the door rail also pulls the glass retaining extrusions together. This action, along with our specially designed door retaining gasket, creates a tremendous amount of force (more than 900 lbs.) in our 9" (228.6 mm) Corner Rail. That's 100 lbs. per inch. Imagine how much force is created in our full length 35-3/4" (908 mm) Door Rails!

Sold by the: Each
Minimum order: 1

  • 35-3/4" (908 mm) Length for 1/2" (12 mm) Glass
  • Use Monolithic Tempered Glass
  • Patented Wedge-Lock® Glass Securing System
  • Models to Fit from 3/8" to 3/4" (10 to 19 mm) Glass
  • Available in Several Stock Architectural Finishes - Custom Finishes Available
  • Available With and Without Locks
  • Matching Sidelite Rails Available

Additional information

The Wedge-Lock® Glass Securing System gives you more than a secure attachment to the glass. It provides the fastest installation time of any door rail system offered to the industry. Experienced installers can have a door prepared for installation in less than ten minutes.

CRL Wedge-Lock® Door Rails come completely fabricated and ready-to-install right out of the carton with the End Caps installed. After the rail is installed, the only thing required before hanging the door is to attach the door arm or pivot (not included) to the adjustable door alignment slide already assembled in the Door Rail. The Adjustable Door Alignment System feature allows you to adjust the door 1/8" (3.2 mm) toward or away from the jamb without removing the door. This is standard on both top and bottom rails.

After the door is installed all you need do to adjust the door is to remove the End Cap. This will reveal three socket head cap bolts. The center bolt is the securing bolt used to lock the adjustable slide in position. The two outer bolts are used to adjust the slide 1/8" (3.2 mm) in or out. The low profile of the adjustable slide allows the pivots with slotted grooves to be moved to a position other than the American Standard Setback of 2-3/4" (69.8 mm). This means we can fabricate them for vertically out-of-square openings.

Other reasons to choose Wedge-Lock® Door Rails: Models are available to accept 3/8" to 3/4" (10 or 19 mm) glass; a rigid single component housing that will not shift and fall out of adjustment over time because it is not made up of two halves; the internal components do not require removal before installation; the glass securing pads are designed for longevity in extreme environments.

NOTE: All Wedge-Lock® Door Rails feature the built-in Jamb Alignment Block, but arms and pivots must be ordered separately to meet job requirements.

CRL Wedge-Lock® Door Rails come in several standard finishes, and can be quoted in custom finishes and widths upon request. Rail Specifications, Templates and Hardware Packages are available from CRL Technical Sales SGAW Customer service.

ORDERING INFORMATION:
â?¢ All Door Rails are supplied with standard Kwik-Adjustâ?¢ Pivot Alignment System. Closer Arms and Floor or Overhead Pivots must be ordered separately.
â?¢ Models with Locks are supplied with the Lock Mechanism installed. Matching finish Keyed Cylinders or Thumbturns must be ordered separately.
â?¢ End Caps are included in the stock Door Rail lengths below. Door Rail length (including End Caps) must be specified when ordering Custom Length Rails.

Important notes

Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.


Shipping note

SHIPPING AND PACKING CHARGES ARE CALCULATED AS FOLLOWS:

$68.50 + $2.00 per item + $7.00 Packing charge (if applicable, see above) for orders subtotaling less than $45.00.

NOTE: Shipping charges apply to the 48 continental states ONLY.
Extra shipping charges may apply to shipments to Hawaii and Alaska.
We will call you with any additional shipping charges.

NOTE: The customer must pay for any customs charges associated with international shipments.

Related products

Customers also bought

$139.04
CRL All White Cologne 037 Series Wall Mount Hinge CRL C0L037AW
$104.39
$78.29
$94.64
$110.19
CRL Satin Chrome Cologne 037 Series Wall Mount Hinge CRL C0L037SC
$123.24
CRL Satin Nickel Cologne 037 Series Wall Mount Hinge CRL C0L037SN
$123.24
2-1/2 inch High Speed Hole Saw - CRL HS8540
$27.88
$166.04
Gift certificates