Product Information
SHOWER DOOR ON SALE for a LIMITED TIME ONLY! ALSO FREE CRATING ON ALL ONLINE ORDERS!
Sale applies to limited quantity and will end without notice.
Pamper yourself with the bathroom of your dreams with our Premier Frameless series. These Shower Doors are built using premium 3/8" or 1/2" thick tempered glass, and heavy duty hinges, panel mounts, and pulls. The pull mountings are drilled through the glass for a secure and seamless installation. All glass edges are highly polished. The hardware is available in a wide variety of fine architectural finishes (choose below). The final product is a long lasting, elegant, and functional enclosure that will enhance the beauty and value of any home.
•
We custom build your shower door to your exact specifications!
• Upon completion of order, we will send you an easy to use form to fill in exact dimensions.
• If you are looking for a size, configuration, or color not shown below, please
contact us here or call us at (626) 798-1895.
Specifications:
Width: 22" to 30" (choose below)
In-Line Panel Width: 6" to 30" (choose below)
Height: Up to 72" (choose below)
Glass: Choose below
Standard Hardware:
Hinge: Qty. 2 on each door hinge
| Pulls: Qty. 1 on each door |
Door width below 24"
Hinge Series: Geneva Wall Mount |
Door width above 24"
Hinge Series: Vienna Wall Mount |
Pulls: 8" back-to-back pulls
|
| Panel Mounts: U-Channel or U-Clamp (choose below) |
Aluminum Deep U-Channel |
Fixed Panel U-Clamps |
*IMPORTANT NOTE: Option #3 seal type requires special care. In order for the Hi-Bond tape to maintain contact, the shower door should not be washed with any harsh chemical cleansers, and the shower door must be dried after each use. Sam's Glass does not warranty the tape bond on option #3.
*IMPORTANT NOTE: The glass door and panels are custom sized according to which seal is chosen. Please choose carefully.
Installation Tool Bundle for our Custom Frameless Shower Doors
PART # FL-T (Add This Option Below)
We offer this bundle at a GREATLY reduced price exclusively for our customers who purchase a frameless shower door.
(In addition to these tools, you will of course need to use your own power tools, suction cups, gloves, etc.)
This bundle includes one of each of the following:
Weldon .486 Diameter Countersink #CS18S, Jobbers Length 1/4" Fractional Size Drill #60114, 1/4" Spearpoint Glass Drill #416, Protective Goggles #ES432, Wexfor II Nylon Strap Frame Caulking Gun 7-to-1 Ratio #WG21001, Single Edge Razor Blades 10-pack #112020, 3/4" Masking Tape #40334, #2 Phillips 1/4" Screwgun Bit 1-15/16" Long #492, Magnetic Screwgun Insert Bit #M490, 1/4" Hex Phillips Insert Bit #3 Point #SD333, 10" Magnetic Screwdriver with Four Bits #3198. |
Details and Sold Separately Prices |
Please fill out the following worksheet and fax it to (626) 798-5712
FL2-R CUSTOMER WORKSHEET
/Shower Doors/FL Series Custom Extra-Heavy Duty Frameless Hinged and Sliding Shower Doors ** Huge Sale **/FL02 Door with In-Line Panel/FL2 Frameless Glass Shower Door with In-Line Panel - Hinged on Right
