Product Information

Click HERE to view our higher quality and lower cost SGAW products.
Click HERE to view these LOWER COST products tested above and beyond the C.R. Laurence standards.

TECHNICAL DRAWING 1     TECHNICAL DRAWING 2

The CRL Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations.

Additional Product Information:
Using two hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 80 pounds (36 kilograms) with a maximum width of 28 inches (711 millimeters).
Using three hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 120 pounds (54 kilograms) with a maximum width of 32 inches (813 millimeters).

Standard Reversible Pivot Pin: Each Pinnacle Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90º. The opposite side is marked 85º. Standard Pinnacle Hinges come with the 90º side activated. Offset Models come with the Pin pre-set to 85º (5º tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the Standard 5º Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45º). Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.

Specifications:

• Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter) Tempered Safety Glass
• Construction: Solid Brass
• Hinge Swings: 90º in and 90º out
• Closing Type: Self-Centering when within 15º of closed position
• Cut-Out Required
• Includes: One Hinge, Gaskets, Screws and Template

Sold by the: Each
Minimum Order: 1 Each

Please check the specifications and any technical drawings to ensure that you are using the correct size and number of hinges or pivots for your application. We are not responsible for any damage due to improperly used hardware.

These items may complete your shower door:

Glass Door Hinges	Glass Door Pulls	Glass Door Knobs	Bathroom Towel Bars
Combo Bars	U-Channels	Shower Panel Clamps	Shower Door Seals

Note: Oil Rubbed Bronze finish will smear on your hands because it is real oil rubbed bronze powder.
After some cleaning, the smearing will end.

For a limited time only, orders over $173.00 will be automatically discounted 2% at checkout!

NOTE: The actual color of the product may appear different
due to variations in the way computer monitors display color.

Shipping Notes

SHIPPING AND PACKING CHARGES ARE CALCULATED AS FOLLOWS:
$13.50 + $2.00 per item + $0.00 Packing charge (if applicable, see above) + $7.00 for orders subtotaling less than $173.00.

NOTE: Shipping charges apply to the 48 continental states ONLY.
Extra shipping charges may apply to shipments to Hawaii and Alaska.
We will call you with any additional shipping charges.

NOTE: The customer must pay for any customs charges
associated with international shipments.

Product Code: P1N044ABRZ