Product Information
Technical Drawing 1 Technical Drawing 3 Technical Drawing 5
Technical Drawing 2 Technical Drawing 4
The CRL Elite Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. The Elite Series is a premium hinge for the wider and heavier glass doors. Unlike most other hinges, the Elite can be side mounted on the top and bottom corners of the door, or anywhere in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5° offset door closure. A Custom Pivot Pin is available for "off-angle" installations.
Additional Product Information:
Standard Reversible Pivot Pin: Each Elite Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90º. The opposite side is marked 85º. Standard Elite Hinges come with the 90º side activated.
Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the Standard 5° Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45º). If using the Custom Pivot Pin, contact our Technical Sales Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.
Specifications:
Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter) Tempered Safety Glass
Special Feature: Elite has the ability to be side mounted at the top and bottom corners of the door, or anywhere in-between. Corner mounting allows more glass exposure
Construction: Solid Brass
Hinge Swings: 90º in and 90º out
Closing Type: Self-Centering when within 15º of closed position
Cut-Out and Hole Required
Includes: One Hinge, Gaskets, Screws and Template
Sold by the: Each
Minimum Order: 1 Each
Please check the specifications and any technical drawings to ensure that you are using the correct size and number of hinges or pivots for your application. We are not responsible for any damage due to improperly used hardware.
For a limited time only, orders over $60.00
will be automatically discounted 5% at checkout!
NOTE: The actual color of the product may appear different
due to variations in the way computer monitors display color.
Shipping Notes
SHIPPING AND PACKING CHARGES ARE CALCULATED AS FOLLOWS:
$10.50 + $1.00 per item + $0.00 Packing charge (if applicable, see above) + $7.00 for orders subtotaling less than $31.00.
NOTE: Shipping charges apply to the 48 continental states ONLY.
Extra shipping charges may apply to shipments to Hawaii and Alaska.
We will call you with any additional shipping charges.
NOTE: The customer must pay for any customs charges
associated with international shipments.
Product Code: ELT074ABR