Product Information

Click HERE to view our higher quality and lower cost SGAW products.
Click HERE to view these LOWER COST products tested above and beyond the C.R. Laurence standards.

This CRL B5T Tapered Aluminum Base Shoe is used as the base channel for glass railing systems. It can be clad in five choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Aluminum Base Shoe to the substrate. CRL has engineered and tested a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with Instructions, Installation Hints, Cleaning, and Refinishing techniques is available.

• Typically Used as the Base Channel for Glass Railing Systems or Windscreens
• For 1/2" to 5/8" (12 to 16 mm) Monolithic Tempered Glass
• Custom Lengths
• Works With TL5W10 TAPER-LOCâ?¢ Taper Sets
• Custom Cutting and Mitering Service Test Reports Available

All heavy aluminum base shoes have a stock length tolerance of plus or minus 3/4 inch (19 millimeters)

CAPACITY:
1/2 inch (12 millimeter) Thick Glass when using TAPER-LOC™ Dry Glaze System;
1/2 or 5/8 inch (12 or 16 millimeter) Thick Glass when using Wet Glaze System

NOTE: 20 feet (6.10 meter) Extrusion Only (without holes) cannot be used for the Dry Glaze System unless the Base Shoe is fabricated to the above tested and approved hole and counter bore pattern. The Dry Glaze System requires that the attachment holes be counter bored so that no part of the fastener protrudes above the base of the channel opening.

SHIPPING NOTE: Due to the difficulty in packaging and handling 20 feet (6.10 meters) stock lengths, it is suggested that you Will Call these at any of our distribution centers. If requiring shipment, all packaging and handling concerns must be agreed to by CRL and the customer prior to shipping. All shipping arrangements will be documented on your quotation for your signed approval.

Sold by the: Each
Minimum Order: 1 Each

Related Items

B5T90BS CRL Brushed Stainless 12" 90 Degree Mitered Corner Cladding for B5T Series Tapered Base Shoe	B5TECBS CRL Brushed Stainless End Cap for B5T Series Tapered Base Shoe	BTCBS10 CRL Brushed Stainless Cladding for B5T Series Tapered Base Shoe
BSDB38 CRL Aluminum Drain Block for B5S Base Shoe

For a limited time only, orders over $173.00 will be automatically discounted 2% at checkout!

NOTE: The actual color of the product may appear different
due to variations in the way computer monitors display color.

Shipping Notes

SHIPPING AND PACKING CHARGES ARE CALCULATED AS FOLLOWS:
$97.00 + $2.00 per item + $0.00 Packing charge (if applicable, see above) + $7.00 for orders subtotaling less than $173.00.

NOTE: Shipping charges apply to the 48 continental states ONLY.
Extra shipping charges may apply to shipments to Hawaii and Alaska.
We will call you with any additional shipping charges.

NOTE: The customer must pay for any customs charges
associated with international shipments.

Product Code: B5TC

OUT OF STOCK